Remove the suction cup by inserting one finger under the rubber pad to let air in. Then carefully remove the entire suction pad from contact surface.
To keep the suction cup in good condition, release the cup when it is not in use. Avoid causing any damage to the rubber pad.
Warnings: To avoid any damage to the rubber pad, do not force to uninstall as it may damage both surface and product causing suction cup and pad to separate.
|suhk-shuh n kuhp|
An object using negative pressure of air or water to adhere to nonporous surfaces and in the process creates a partial vacuum.
Types of Surfaces
Using our patented technology to create the most powerful, industrial strength vacuum seal, FECA products will hold tightly on non-porous surfaces. See what materials you can use these products on. Every manufacture is different, so test before use.
Porcelain or Enamel over Cast Iron
Often used for sinks because it is smooth and nonporous, this material can make a suitable surface for suction cup products.
The process of manufacturing mirrors results in a smooth, reflective surface that is waterproof and nonporous, making a mirror a suitable material for using suction cup products.
After the glaze is painted or sprayed on, the resulting tile is water-proof and non-porous. Thus, it is suitable for using suction products.
General unglazed tile, mainly refers to polished quartz tiles, is waterproof and non-porous surface. It is suitable for using suction products.
Glass is a transparent and hard, water-proof, non-porous material. It is suitable for using suction cup products.
Acrylic sheet is waterproof and non-porous, thus, it is suitable for using suction cup products.
As stainless steel is water-proof, non-porous material, thus, it is suitable for using suction products.
Marble and natural stone is porous. By sealing the marble surface, the sealer fills in the pores of the natural stone for a non-porous finish.
Quartz is nonporous without the need to be sealed, making it great for stain-free kitchens. When made into a smooth surface, this material is suitable for suction cup products.
Normal building materials such as wood rosewood,teak, sandalwood and other natural untreated wood surface is porous, thus, not suitable for using suction cup products.
Wood Veneer Sheets
Thin slices of wood sheets glued to a board. The surface of sheet is breathable and porous. It is not suitable for using suction cup products.
Common wood panel walls are painted by water-based paint which is porous. Thus, it is not suitable for using suction cup products.
Old or cracked tile may cause tile surface to leak air, thus, it is not suitable for using suction products.
Widely used for wall or street art. Due to the tiny tile surfaces and multiple seams, thus, it is not suitable for using suction products. Rule: The area you attempt to attach must be bigger than the rubber pad.
Imitation Brick Tile
Commonly used for balcony or column surface. Due to surface roughness over 0.4mm or its porous surface, it is not suitable for using suction products.
Wood is porous and won’t hold a suction, even when painted. Using the suction cup products on these surfaces may leave ring marks as well, so they are unsuitable materials.
Normal interior wall was painted by breathable water-base paint which is breathable, thus, it is not suitable for using suction cup products.
Wallpaper is a porous surface, thus, it is not suitable for using suction products.
Concrete wall is porous surface, thus, it is not suitable for using suction products. To avoid damaging of concrete wall, do not attempt to paste the plastic disc.
Love & Care
A little love and care will go a long way.
Reapplying the suction cups every 3 months to secure the suction power.
Use clean water or non-toxic cleaner to clean the rubber pad on suction cup before use each time. Make sure no lint or debris remains on surface by using a masking tape or regular scotch tape to remove any remaining.
Release the lock to keep rubber pad flat when not attaching to surfaces.
Store suction cup in cool, dry place when not in use.
Dos and Don’ts
Keep rubber pad and adhering surface clean before applying. Always confirm the suction cup is firmly attached. Follow the product's installation instruction. Enjoy your FECA products. Remember the Love & Care instruction above.
Do not overload. Do not use to hold dangerous, valuable, fragile, antiques/heirlooms, or non-replaceable items. Do not attach the suction cup to the surface which is smaller than the rubber pad, uneven, rough and porous surface. Do not hang items over heads or beds. Do not use if rubber pad is cracked or shows any visible damage.
Like being first? Sign up now for exclusive offers, sales, and news.
Search our store
Valid at fecausa.com from 12/25/2017, 12:01am PST through 12/28/2017, 11:59pm PST. Up to 15% discount valid on the purchase of entire store. Cannot be applied to previous purchases and cannot be redeemed for cash or combined with any other offer. To redeem online, enter promo code XMAS2017 at check out. Valid in the U.S. only. Terms subject to change.